Settings menu
84
Appliance switch-off
To save energy the dryer will switch
off automatically after 15 minutes. You
can lengthen or shorten the time.
The dryer will switch off automatically
after 10, 15 or 20 minutes,
– if no further selection is made after
switching the dryer on
– at the end of the anti-crease phase
– after a programme without an anti-
crease phase has finished.
However, there is no automatic switch-
off in the event of a fault.
Options
– after 10 minutes
– after 15 minutes (factory default)
– after 20 minutes.
Memory
The electronics will store in memory a
drying level or options for a selected
programme. The duration selected for
a timed drying programme will also be
stored in memory. These settings will
then appear the next time the
programme is chosen.
Options
– Off (factory default)
– On
Exception:
The
Cottons
programme will
remain unchanged.
Anti-crease
If you have pressed the
Anti-crease
button:
the drum will continue to rotate in a
special anti-crease rhythm for a
maximum of 2 hours after the end of
the drying process. This helps prevent
creasing if laundry is not going to be
removed immediately. You can reduce
the duration of the anti-crease phase.
Options
– 1 hr
– 2 hr (factory default)
Delay start
With the delay start function you can
delay the time at which the
programme should start (see "Delay
start").
You can choose whether you want the
display to prompt you to enter the
time at which the programme should
begin (Start at) or the time at which it
should end (Finish at).
Options
– Start at (factory default)
– Finish at
