EcoFeedback
23
You can use the
EcoFeedback
sensor
to call up information about the energy
consumption of your dryer.
Touching the
EcoFeedback
sensor will
call up two types of information:
– an estimate of the consumption
before the programme begins
– the energy
consumption
during the
programme.
The
EcoFeedback
sensor will light up
and information will appear in the
display.
Both will go out automatically a few
seconds later or alternatively they can
be confirmed with
OK
.
At the end of the programme, before
opening the door, you can also call up
the following in the display:
– the energy consumption and
– the degree of soiling of the fluff filters
and the plinth filter (0 % = light, 50 %
= medium, 100 % = heavy).
Accumulating fluff and soiling will
cause the programme duration to
increase which in turn will increase
energy consumption.
1. Estimate
After selecting a programme, touch
the
EcoFeedback
sensor.
For a few seconds bars which indicate
the estimated consumption will appear:
Energy
The more bars visible, the higher the
energy consumption.
The estimate will vary depending on the
programme and any options selected.
2. Actual consumption
Touch the
EcoFeedback
sensor.
You can view the actual amount of
energy used.
Example:
Energy
2.0
kWh
< 0.1 kWh will be displayed if the
energy consumption is very low.
The consumption will vary depending
on the programme stage and residual
moisture present.
If the door is opened or the tumble
dryer has switched off automatically
at the end of the programme, the
data will revert to the estimated
consumption.
Total consumption setting
– shows consumption data for the
programme which has just been run
and
– shows total energy consumption to
date.
See "Settings menu" for more detailed
information.
