Miele TEL 785 WP Operating Instructions Manual Download Page 42

Page: 42 / 100

Programme chart

Woollens handcare

max.

2 kg*

Use for

Woollen garments and fabric containing wool blends, e.g. pullovers,
cardigans, tights.

Note

- Wool and wool blend items are only fluffed up; they are not dried

completely.

- Remove the garments as soon as the programme has finished.

Shirts

max.

2 kg*

, Normal, Hand iron



, Hand iron



Use for

Shirts and blouses

MobileStart



The Miele app is used for selecting programmes and operating the appliance.

Wash2Dry

The programme is selected automatically in conjunction with the programme se-
lection on the connected washing machine.

Bed linen

max.

4 kg*

HygieneDry, Extra dry, , Normal, Hand iron



, Hand iron



, Ma-

chine iron

Use for

Bed linen, pillowcases

Tip

Use

HygieneDry

for hard-wearing fabrics with special hygiene re-

quirements.

Summary of Contents for TEL 785 WP





































































































Search results

Summary of Contents for TEL 785 WP

Reviews:

Related manuals for TEL 785 WP

Brands by name

Popular brands

Miele TEL 785 WP, Operating Instructions Manual

Search results

Summary of Contents for TEL 785 WP

Reviews:

Related manuals for TEL 785 WP

Brands by name

Popular brands