Miele TEL 785 WP Operating Instructions Manual Download Page 34

Page: 34 / 100

4. Selecting programme settings

Selecting the drying level

Check the “Programme chart” to see
which programme you can select a dry-
ing level for and which drying level
meets your requirements.





Normal

0:55



Touch the





sensors to select a

drying level.

HygieneDry

drying level

Tip:

The

HygieneDry

drying level can be

selected for some programmes. Spe-
cific hygiene requirements for robust
garments with the



care symbol are

met.

HygieneDry

dries items at a temperature

that is constant over an extended
period of time (extended temperature
holding time). This kills off micro-organ-
isms (such as germs or dust mites) and
reduces allergens in the laundry.

Tip:

Reduce the load size for the cor-

responding programme to half the max-
imum load size specified in these oper-
ating instructions.

Temperature holding time

- An estimated programme running

time is displayed at the start of a pro-
gramme for which the

HygieneDry

drying level has been selected.

- The programme completes the nor-

mal drying process for laundry care
first. The finish time counts down to
0 minutes. Then the temperature
holding time starts.

- At the start of the temperature hold-

ing time, the remaining programme
running time is extended by
85 minutes to produce a hygienic
drying result.

A programme for which the

Hygiene-

Dry

drying level has been selected

should not be interrupted,
as this would prevent the micro-or-
ganisms from being killed off.
Do not cancel the drying programme.

Summary of Contents for TEL 785 WP





































































































Search results

Summary of Contents for TEL 785 WP

Reviews:

Related manuals for TEL 785 WP

Brands by name

Popular brands

Miele TEL 785 WP, Operating Instructions Manual

Search results

Summary of Contents for TEL 785 WP

Reviews:

Related manuals for TEL 785 WP

Brands by name

Popular brands