Miele TEL 785 WP Operating Instructions Manual Download Page 32

Page: 32 / 100

3. Selecting a programme

2. Selecting further programmes/





Turn the programme selector to

Fur-

ther programmes/



You can select the programme you
want via the display.



Touch the



sensor controls until

the programme you want appears in
the display.







Warm air



Confirm the programme with the

sensor control.

The selected programme will be shown
in the display. The standard display will
then reappear.

Tip:

If you change your mind and want

to select a different programme, briefly
turn the programme selector one way
and then the other to cancel the selec-
ted programme.

3. Selecting MobileStart



Tip:

In this case, the appliance is oper-

ated via the Miele app. In order to use
MobileStart



, the tumble dryer must

be logged on to the WiFi network and

Remote control

must be switched on.



Turn the programme selector to

Mo-

bileStart





Follow the instructions in the display.



After loading the drum, touch the

Start/Add laundry

sensor control.

The tumble dryer can now be operated
via a mobile device together with the
Miele app.

Summary of Contents for TEL 785 WP





































































































Search results

Summary of Contents for TEL 785 WP

Reviews:

Related manuals for TEL 785 WP

Brands by name

Popular brands

Miele TEL 785 WP, Operating Instructions Manual

Search results

Summary of Contents for TEL 785 WP

Reviews:

Related manuals for TEL 785 WP

Brands by name

Popular brands