1 Adapter
2 Nut
3 Hose clip
4 End of the hose
5 Non-return valve
6 Dryer drain hose
^
Fit adapter
1
to the sink drain outlet
using nut
2
.
If this nut has a flat disc in it you
should take the disc out first.
^
Attach the end of the hose
4
to
adapter
1
.
^
Use a screwdriver to tighten hose
clip
3
up close to the nut.
,
The non-return valve
5
must only
be fitted in an upright position or at a
slight angle (see illustration). If it is
fitted in a horizontal position it will
not work correctly.
^
Fit the non-return valve
5
to the drain
hose of the dryer
6
(make sure it is in
the correct position, see illustration).
^
Secure the non-return valve using
hose clips.
Installation
41
