Miele SUPERTRONIC Operating Instructions Manual Download Page 49

Page: 49 / 94

Programme overview

Soft toys

Cold to 40°C

Max. load 1.0 kg

Item

Soft toys, specified as machine-washable by the manufacturer.

Note

Do not wash soft toys with a straw filling.

Starch

Max. load 7.0 kg

Item

Table cloths, napkins and overalls that require starching.

Notes

– Reduce the spin speed for items which crease easily.

– The laundry should be washed but not treated with fabric

conditioner.

Separate rinse

Max. load 7.0 kg

Item

For rinsing hand-washed items.

Note

Reduce the spin speed for fabrics which crease easily.

Spin

Note

Make sure you select the appropriate spin speed.

Drain

For draining water from the machine.

Pillows

Cold to 90°C

2 pillows (40 x 80 cm) or

1 pillow (80 x 80 cm)

Item

Washable pillows with feather, down or synthetic fillings.

Note

Please observe the instructions on the wash care label.

Summary of Contents for SUPERTRONIC































































































Search results

Summary of Contents for SUPERTRONIC

Reviews:

Related manuals for SUPERTRONIC

Brands by name

Popular brands

Miele SUPERTRONIC, Operating Instructions Manual

Search results

Summary of Contents for SUPERTRONIC

Reviews:

Related manuals for SUPERTRONIC

Brands by name

Popular brands