en-US
24
Replace the dust container on the
PowerUnit connector.
Cleaning the pre-filter (Fig. 36–39)
The pre-filter is located in the dust con-
tainer.
Clean the pre-filter when required.
Remove the dust container.
Remove the fine dust filter (Fig. 35).
Empty the dust container over a trash
can and lift the pre-filter upwards to
remove it.
Unlock the motor protection filter by
turning it counterclockwise and lift it
upwards to remove it.
Risk of damage caused by incor-
rect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not use pointed or sharp-edged
objects to clean the filter.
Carefully knock the dust out of the
pre-filter over a bin.
Tip:
Use a tool like a fine cleaning brush
to clean the inside of the pre-filter thor-
oughly.
You do not need to clean the motor pro-
tection filter. It can be removed so that
the inside of the pre-filter is easier to
reach.
After cleaning the pre-filter, place the
motor protection filter back into the
pre-filter securely, making sure it is
properly positioned.
Lock the motor protection filter by
turning it clockwise as far as it will go.
Replace the pre-filter in the dust con-
tainer.
To do this, line up the guide lines on
the two sections and turn the dust
container lid back to its original posi-
tion.
Close the cover at the bottom of the
dust container, making sure it clicks
into place.
Replace the fine dust filter.
Replace the dust container on the
PowerUnit connector.
Cleaning the dust container
Clean the dust container as required.
Remove the dust container.
Empty the dust container over a
garbage can and lift the pre-filter up-
ward to remove it (Fig. 36).
Clean the dust container using water
and mild detergent.
Dry the dust container carefully.
Reinsert the pre-filter in the dust con-
tainer and turn the pre-filter back to
its original position (Figs. 38 + 39).
Replace the dust container on the
PowerUnit connector.
Cleaning the Electrobrush/handheld
brush (Fig. 40)
(The availability of the handheld brush
depends on the model)
Disconnect the Electrobrush/hand-
held brush from the vacuum cleaner
(Fig. 06).
Summary of Contents for SMUL0
