Miele SMUL0, Operating Instructions Manual

Page: 12 / 108

en - IMPORTANT SAFETY INSTRUCTIONS
12

Temporary or permanent operation on an autonomous
power supply system or a power supply system that is not
synchronized with the grid power supply (e.g., island net-
works, back-up systems) is possible. A prerequisite for op-
eration is that the power supply system complies with the
specifications of EN 50160 or an equivalent standard.
The function and operation of the protective measures pro-
vided in the domestic electrical installation and in this
Miele product must also be maintained in isolated opera-
tion or in operation that is not synchronized with the grid
power supply, or these measures must be replaced by
equivalent measures in the installation. As described, for
example, in the current version of VDE-AR-E 2510-2.

Charge the vacuum cleaner at an ambient temperature
between 32°F and 115°F (0°C and 45°C).
 Stop using the AP01 battery immediately if you notice an
unusual smell from it, if liquid is leaking from it, if it is sig-
nificantly overheating, or if it is discolored or deformed.
Dispose of the AP01 battery immediately (see safety notice
“Disposing of the AP01 battery” at the end of this chapter
as well as “Caring for the environment – Disposing of old
batteries”).

Batteries will deplete over time. They can then leak cor-
rosive fluids. Avoid contact with the eyes and skin. In the
event of contact, rinse thoroughly with water and seek
medical advice.

Please contact Technical Service before sending the
AP01 battery.