Miele SMUL0, Operating Instructions Manual

Page: 21 / 108

en-US
21
Symbols on the holder show where to
attach the different accessories.
You can fit the accessories holder to the
wall bracket (see “Installation and con-
nection” – “Connecting the accessories
holder”).
Multi Floor XXL Electrobrush (Fig. 26)
Follow the flooring manufacturer’s
cleaning and care instructions.

Damage caused by trapped ma-
terial.
Risk of the flooring getting
scratched.
Make sure that there is no coarse dirt
or debris trapped in the bottom of
the Electrobrush, e.g., shards or
stones.
The Electrobrush can be used for daily
cleaning of carpets, rugs, and hard
floors.
Tip: The suction wand is not a conve-
nient option for cleaning carpeted
stairs.
Tip: If you ever need to vacuum up sub-
stantial amounts of coarse dirt or de-
bris, use the PowerUnit solo (see “In-
stallation and connection“ – “Using the
PowerUnit solo”).
Miele offers a range of suitable acces-
sories for many Special Modes (see
“Optional accessories”).
Electro Compact handheld brush
(HX SEB) (Fig. 27)
(depending on model)
Follow the flooring manufacturer’s
cleaning and care instructions.

Damage caused by trapped ma-
terial.
Risk of the flooring getting
scratched.
Make sure that there is no coarse dirt
or debris trapped in the bottom of
the handheld brush, e.g., shards or
stones.
The handheld brush is particularly suit-
able for intensive cleaning of car seats
and carpeted stairs.
For optimum cleaning results on up-
holstery, use the upholstery nozzle XL.
Tip: The suction wand is not a conve-
nient option for cleaning car seats or
stairs.
Tip: If you ever need to vacuum up sub-
stantial amounts of coarse dirt or de-
bris, use the PowerUnit solo (see “In-
stallation and connection“ – “Using the
PowerUnit solo”).
Additional battery and charger cradle
(Fig. 28)
(depending on model)
Using the additional battery doubles the
amount of time the vacuum cleaner can
be used for.
Before charging for the first time,
please note the information in “Instal-
lation and connection – General bat-
tery information”.

After the battery has been fully
charged in the PowerUnit, the charger
cradle can be used to charge it. Push
the battery into the charger cradle un-
til it audibly clicks into place.