^
Make the worktop cut-out for one or
more appliances in accordance with
the building-in diagrams.
Remember to maintain a
minimum
safety distance
from the
back wall
,
as well as from any
tall unit or side
wall
to the right or left of the
appliance.
See "Safety instructions for
installation".
^
Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
The materials used must be
heat-resistant.
If, during installation, you find that the
seals on the corners of the frame are
not flush with the worktop surface,
the corner radius (
ß
R4) can be
carefully scribed to fit.
Preparing the worktop
26
