Raising and lowering the
browning unit
^
To
raise
the browning unit, turn the
left-hand control to
-
.
The browning unit will extend up to its
full height, even if you release the
control knob back to the
ß
symbol.
You can select any height you wish for
the browning unit by turning the control
briefly to
e
.
^
To
lower
the browning unit, turn the
left-hand control to
e
and hold it until
the browning unit is at the required
height or until it is fully lowered.
Do not lower the browning unit
completely until the residual heat
indicator has gone out.
Switching on and off
Do not leave the appliance
unattended whilst it is being used.
The appliance is
switched on
by
turning the right-hand control to the
required power setting, and
switched
off
by turning the control back to "0".
The control can be turned clockwise or
anti-clockwise to switch the appliance
on and off.
N
lights up in the display after the
appliance has been switched on,
The residual heat indicator comes on
as soon as a certain temperature is
reached. It only goes out once the
ceramic surface of the browning unit
can be touched safely.
The appliance only heats up when
the browning unit is raised to at least
70 mm.
Operation
15
