Miele PWT 6089 Vario Operating And Installation Instructions Download Page 20

Page: 20 / 96

Settings menu

The

Settings

menu is used to alter the electronics of the

washer-extractor and tumble dryer stack to suit different
requirements. See the relevant section of the separate
washer-extractor or tumble dryer "Commissioning, Program
chart and Settings" booklet for further information on how to
alter settings.

Operating the appliance wash-salon mode

The entry menu will vary depending on the

Controls

setting

selected.

The machine is operated either with the shortcut buttons

or the jog shuttle.

WS shortcut keys, basic

Washer-extractor display:

Cottons Uni.

60°C

Minimum iron

40°C

Delicates

40°C

4 Woollens

30°C

Tumble dryer display:

Cottons

2 Minimum iron

Normal

3 Woollens handcare

4 Cool air

4 programs are available to choose from. To specify which
programs are available go to the

Settings/supervisor level

menu.

Operating the washer-extractor and tumble dryer stack

Summary of Contents for PWT 6089 Vario

































































































Search results

Summary of Contents for PWT 6089 Vario

Reviews:

Miele PWT 6089 Vario, Operating And Installation Instructions, Page: 20 / 96

Search results

Summary of Contents for PWT 6089 Vario

Reviews: