Programmable functions
67
Temperature reduction
At high altitudes, water has a lower
boiling point. Miele recommends ac-
tivating the Temperature reduction set-
ting at altitudes of 2000 m or above to
prevent water from boiling.
Options
= The Temperature reduction set-
ting is switched off
(factory
default setting)
= The Temperature reduction set-
ting is switched on
Maximum rinse level
The water level in the rinses can be
permanently set to the highest value in
the
Cottons
and
Minimum iron
pro-
grammes.
This function is important for allergy
sufferers as it achieves excellent wash
results. The water consumption will be
increased.
Options
= Maximum rinse level is
switched off
(factory default
setting)
= Maximum rinse level is
switched on
Suds cooling
Additional water flows into the drum at
the end of the main wash to cool the
suds down.
Suds cooling takes place when the
Cot-
tons
programme with a temperature of
70 °C or higher is selected.
Suds cooling should be activated:
– To prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin
– Where the drainage pipes do not
comply with DIN 1986
Options
= Suds cooling is switched off
= Suds cooling is switched on
(factory default setting)
