Before using for the first time
18
Running the first programme
For safety reasons, spinning is not pos-
sible until the machine has been pre-
pared for use for the first time. To activ-
ate the spinning function, you must run
a wash programme without laundry and
without detergent.
Using detergent could result in an ex-
cessive build-up of foam!
Open the stopcock.
Turn the programme selector to the
Cottons
position.
The washing machine is now switched
on and the temperature
60 °C
lights up
in the control field.
Touch the
Start/Stop
sensor control.
The programme starts and the
sym-
bol lights up in the control field.
After 10 minutes, the indicators dim
and the
Start/Stop
sensor control
starts flashing.
At the end of the programme, the Anti-
crease function is switched on. The
symbol lights up in the control field;
:
appears on the time display.
Touch the
Start/Stop
sensor control.
The door will unlock.
Reach under the door grip and pull
the door open.
Tip:
Leave the door slightly open to al-
low the drum to dry.
When the programme has ended,
turn the programme selector to
.
The washing machine is switched off
and is now ready for use.
