Problem solving guide
39
Programme cancellation and error message
Problem
Cause and remedy
The fault indicator
light
lights up,
and
appear altern-
ately on the time display
and the buzzer sounds.
The water inlet is blocked or restricted.
Check whether the stopcock has been properly
opened.
Check whether the inlet hose is kinked.
Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
Clean the filter.
The fault indicator
light
lights up,
and
appear alternately
on the time display and
the buzzer sounds.
The drain is blocked or restricted.
The drain hose has been fixed too high.
Clean the drain filter and the drain pump.
The maximum drain height is 1 m.
and
appear altern-
ately on the time display
and the buzzer sounds.
There is a fault.
Disconnect the washing machine from the mains
electricity supply, either by switching it off at the
wall socket and withdrawing the plug, or by dis-
connecting it at the circuit breaker.
Wait
at least 2 minutes
before reconnecting the
washing machine to the electricity supply.
Switch the washing machine on again.
Restart the programme.
If the fault message appears again, contact the
Customer Service Department.
The fault indicator
light
lights up,
and
appear altern-
ately on the time display
and the buzzer sounds.
The water protection system has reacted.
Close the stopcock.
Call the Miele Customer Service Department.
