5. Starting the programme – end of the programme
27
Starting the programme
Touch the flashing
Start/Stop
sensor
control.
The door will lock and the programme
will start.
– As long as the
symbol is flashing
in the control field, you can add laun-
dry.
– When the
symbol lights up con-
stantly, the door is locked until the
end of the programme.
If a Delay start time has been selected,
this counts down on the time display. At
the end of the Delay start time or imme-
diately after the programme has started,
the programme duration appears on the
time display.
Energy savings
After 10 minutes, the indicators dim.
The
Start/Stop
sensor control flashes
slowly.
To reactivate the indicators:
Touch the
Start/Stop
sensor control
(this does not have any effect on a
programme that is running).
End of programme
The time display shows
0:00
. The
symbol will remain lit up in the con-
trol field. The door is locked in the anti-
crease phase.
Touch the
Start/Stop
sensor control.
The door unlocks and the
symbol in
the control field goes out.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Remove all items from the drum.
Check the door seal for any foreign
objects.
Tip:
Leave the door slightly open to al-
low the drum to dry.
Turn the programme selector to the
position. This switches the wash-
ing machine off.
If applicable, remove the used cap-
sule from the detergent drawer.
Tip:
Leave the detergent drawer slightly
open to allow it to dry.
