Installationsplan PW 6201 EL
Stand: 11.08.2004
Seite
8
Min. flow pressure
kPa
100
Max. pressure
kPa
1000
Cold water
(Soft water)
Max. throughput (if hot water supply is not available)
l/min
26 (36)
On-site connection thread according to DIN 44 991
Inch
¾" external thread
Length of connection hose (supplied)
mm
1500
Water requirements (average for 60°C programme)
Standard connection [with hot water connection]
l/h
not yet available
Additional requirements if hot water supply is not available.
Max. temperature
°C
70
Min. flow pressure
kPa
100
Hot water
Max. pressure
kPa
1000
Max. throughput
l/min
10
On-site connection thread according to DIN 44 991
Inch
¾" external thread
Length of connection hose (supplied)
mm
1500
Water requirements (average for 60°C programme)
Standard connection [with hot water connection]
l/h
not yet available
If no hot water supply, connect hose to cold water!
Min. flow pressure
kPa
100
Max. pressure
kPa
1000
Raw water
(Optional)
Max. throughput
l/min
32
On-site connection thread according to DIN 44 991
Inch
¾" external thread
Length of connection hose (supplied)
mm
1.500
Water requirements (average for 60°C programme)
Standard connection [with hot water connection]
l/h
not yet available
If connected to raw water supply, subtract cold water (soft)
volume.
If no raw water supply, connect hose to cold water!
Max. temperature
°C
95
Machine drain connection (d
a
× s × l) [DN 70]
mm
75 × 1.9 × 115
On-site drain connection (d
i
× s × l) [DN 70 sleeve]
mm
75 × 1.9 × 50
Drainage via
dump valve
Max. transient throughput
l/min
200
Vented drainage required. If ventilation is insufficient, fit Miele
kit, Mat. no. 05238090.
Drain manifolds serving several machines must be of
sufficient cross-section.
Foam vent
(Optional)
A drainage system for foam escaping from the drain vent can
be built using standard drain pipe sections. An 87° branch
with an end cap should be provided for this purpose.
Machine vent
Vent machine interior to prevent excessive rise in pressure.
Miele plinth UG/UO 6016
Fittings (supplied)
4 × metal angled brackets (to secure machine to plinth)
4 × screws DIN 571 (Ø × length)
mm
8 × 80
4 × rawl plugs (Ø × length)
mm
12 × 60
Machine must be secured!
Fixing materials for floating screed floor to be provided on site
On concrete platform
2 × screws DIN 571 (Ø × length)
mm
8 × 80
2 × rawl plugs (Ø × length)
mm
12 × 60
Machine must be secured!
Fixing materials for floating screed floor to be provided on site
