Miele PW 6107 EL, Installations Plan

Page: 10 / 10

Technisches Datenblatt / Technical datasheet: PW 6207 EL
Datum / Date: 12-01-2011
Seite / Page:
10
Version
WI
It is essential to ensure that the appliance is fastened ade-
quately to the substrate!
Fastening material included with unit:
4 × wood screws DIN 571 (Ø × length) 1/2” x 3 9/16” 12 x 90
4 × screw anchors (Ø × length) 5/8” x 3 1/8” 16 x 80
A sufficiently firm substrate with sufficient load-bearing
capacity is necessary for the installation. The fastening
material included is only suitable for a solid concrete sub-
strate. The fastening material for other suitable substrates
must be provided on site.
Version
OS
It is essential to ensure that the appliance is fastened ade-
quately to the substrate!
The fastening material is not included with the unit
Female thread for the fastening 1/2“ 12 mm
The fastening must be carried out on site corresponding to
the local requirements and conditions. The appliance is
supplied without feet so that the female thread can be used
for fastening with studs.
Machine data Width 36 3/8“ 924 mm
Depth 44 1/2“ 1,130 mm
Height 55 1/8“ 1,400 mm
Housing width 36 1/4“ 920 mm
Housing depth 40 3/16“ 1,020 mm
Width loading opening (clear width) 36 5/8“ 930 mm
Recommended wall spacing (to front edge of appliance
front) 57 1/16“ 1,450 mm
Minimum wall spacing (to rear edge of appliance cover) 15 3/4“ 400 mm
Net weight 1120 lbs 508 kg
Max. floor loading in operation. 6,203 N 6.203 N
Max static loading 5,670 N 5,670 N
Max dynamic loading 533 N 533 N
Max. drum rotation frequency 18.3 Hz 18.3 Hz
Average heat dissipation in the installation room
(depending on room temperature and selected program) 1,520 W 1,520 W
Noise level (re 20 mPA),
relative to the workplace (distance 1 m and 1.6 m high) 70 dB (A) 70 dB (A)
Installation should only be carried out by authorized installers and must comply with local and national building codes.
Observe installation instructions when installing this machine. Alteration rights reserved.