Miele PT 7251, Operating Instructions Manual

Page: 24 / 36

Error messages
,
Repairs to electrical, gas or steam
operated machines may only be carried
out by a suitably qualified person in
accordance with national and local safety
regulations. For gas heated machines in
the U.K. this must be a "Corgi" registered
technician. Repairs and other work by
unqualified persons could be dangerous.
The manufacturer cannot be held liable
for unauthorised work.
Whenever the machine is switched on or the
programme list is called up the controls
carry out an analysis of the system. All
modules and sensors, data from the
operating system, drying programmes and
languages are tested.
If a fault is detected in a programme or a
language the following symbol will appear in
the display
§
. The programme or language
affected cannot be selected.
1 Cottons dry plus 0%
2 Cottons dry 0%
3 Cottons damp 20% §
f
Settings Back <-
Language Deutsch
English §
FC A
If a fault is found in a language that has
already been selected the following
message will appear:
§
Data fault
Function restricted
Language defect
f
A message will flash in the display if there is
a problem either before starting a
programme or once it has started:
If any of the following messages still appear
after five re-starts of the machine the
following general fault message will appear:
§
System fault
Call the Service Department
if restart does not work.
f
The display remains dark.
There is no power to the machine.
^
Check the mains switch and the on-site
fuses.
§
Fan fault
Programme stopped. Press the start button.
Motor overheating.
f
^
Allow the motor to cool down.
§
Machine fault
f
Problem solving guide
24 M.-Nr. 06 533 441