Miele PT 7136 Operating And Installation Instructions Download Page 53

Page: 53 / 60

Display contrast

Display brightness

There are ten different display
contrast and display brightness
settings.

The bar chart shows you the setting.

Standby

To save energy, the display goes out
after 10 minutes and the indicator
light for the

Start

button flashes

slowly.

Standby comes on:

– if a programme is not selected.

– after the

Start

button has been

pressed.

– after the end of a programme.

Not in current Prog.
(the machine is delivered with this
option selected)

Standby comes on:

– if a programme is not selected.

Operating the multi-function selector
switches the display back on again.

off

The display remains on all the time.

Extending the cooling down
time

The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.

The bar chart shows you the setting.
The machine is delivered with 0 mins
(normal cooling down period) set as
standard.

– The programme duration will

increase accordingly.

You cannot extend the cooling down
time for the

Warm air, Cool air,

Woollens handcare or Smoothing

programmes.

Settings menu

Summary of Contents for PT 7136





























































Search results

Summary of Contents for PT 7136

Reviews:

Related manuals for PT 7136

Brands by name

Popular brands

Miele PT 7136, Operating And Installation Instructions

Search results

Summary of Contents for PT 7136

Reviews:

Related manuals for PT 7136

Brands by name

Popular brands