Installation
*INSTALLATION*
48
Gas pressure regulator
The included pressure regulator corre-
sponds with the gas type of the appli-
ance. Verify before installing.
The adjusted pressure is:
Natural gas 4“ w.c.
LP gas 10” w.c.
a
Appliance
b
½
" NPT gas connection
c
Regulator
The regulator must be installed as
shown in the diagram when you con-
nect the Miele appliance to your gas
connection. The regulator has been
adapted by Miele to meet all statutory
safety requirements. The regulator must
be easily accessible after the appliance
has been installed.
A flexible steel hose approved by the
AGA or CGA can be used between the
gas connection and the regulator. This
flexible hose enables the appliance to
be lifted out of the cut-out for mainte-
nance or repair work. Check to make
sure that no drawers, doors, or similar
come into contact with this flexible
hose.
Gas leak due to unsuitable regulator.
Only use the regulator supplied by
Miele.
If you are in any doubt, contact Miele
Customer Service.
Leakage test
After connecting the appliance check
all fittings for gas leaks e.g. with
soapy water.
