IMPORTANT SAFETY INSTRUCTIONS
9
To avoid damaging the cooktop, make sure that the connection
data (voltage and frequency) on the data plate correspond to the
building's power supply before connecting the appliance.
When in doubt, consult a qualified electrician.
Do not connect the appliance to the electrical supply with a power
bar or extension cord. These are a fire hazard and do not guarantee
the required safety of the appliance.
For safety reasons, the cooktop may only be used when it has
been fully installed.
This appliance must not be used in a non-stationary location (e.g.
on a ship).
Any contact with live connections or tampering with the electrical
or mechanical components of the cooktop will endanger your safety
and may lead to appliance malfunctions.
Do not open the casing of the cooktop under any circumstances.
Any repairs not performed by a Miele authorized service techni-
cian will void the warranty.
Defective components should be replaced by Miele original parts
only. Only with these parts can safety of the appliance be assured as
intended by the manufacturer.
The appliance is not intended for use with an external timer switch
or a remote control system.
The connection to the gas supply must be carried out by a quali-
fied service technician in accordance with current local and national
safety regulations (see “Installation – Gas connection”). If the plug
has been removed or the power cord is not supplied with a plug, the
cooktop must be connected to the power supply by a qualified ser-
vice technician (see “Installation – Electrical connection”).
If the power cord is damaged, it must only be replaced by a quali-
fied service technician (see “Installation – Electrical connection”).
