Miele Polaris Operating Instructions Manual Download Page 20

Page: 20 / 60

Cottons

9876

30°C to 95°C

Max. load 5.0 kg

Fabric

Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.

Extra options Short, Water plus, Pre-wash

Note for test institutes:

Short programme: 2.5 kg load and

Short

extra option

Minimum iron

421876

30°C to 60°C

Max. load 2.5 kg

Fabric

Synthetics, mixed fibres and easy care cottons. If fabrics have a
high proportion of man-made fibres, it is advisable to programme
the machine for "Gentle action". See "Programmable functions".

Note

Reduce the spin speed for fabrics which crease easily.

Extra options Short, Water plus, Pre-wash

Delicates

421ac

cold to 60°C

Max. load 1.0 kg

Fabric

For delicate garments made of synthetic fibres, mixed fibres, rayon
and easy care cottons. Also suitable for machine-washable silks.

Curtains, including net curtains, specified as machine-washable
by the manufacturer.

Notes

–

Dust in curtains usually makes using a programme with a
Pre-wash advisable.

–

For curtains which crease easily, reduce the spin speed or de-
select the spin.

Extra options Short, Pre-wash

Woollens

/ac

cold to 40°C

Max. load 2.0 kg

Fabric

Machine-washable or hand-washable wool or wool blend fabrics.
If the care label does not specify a temperature, wash using the
cold setting.

Also suitable for hand-washable silks. Reduce the spin speed.

Express

cold to 40°C

Max. load 2.5 kg

Fabric

Small loads of items which require freshening up and which can
be washed in a

Cottons

programme.

Note

This programme can be used for rinsing individual items. Select
the cold setting, and do not add any detergent.

Extra option

Water plus

Programme chart

Summary of Contents for Polaris





























































Search results

Summary of Contents for Polaris

Reviews:

Related manuals for Polaris

Brands by name

Popular brands

Miele Polaris, Operating Instructions Manual

Search results

Summary of Contents for Polaris

Reviews:

Related manuals for Polaris

Brands by name

Popular brands