Miele Polaris Operating Instructions Manual Download Page 10

Page: 10 / 60

Control panel

Display

See the following page for more in-
formation.

Temperature button

For selecting a temperature.

Spin speed button

For selecting the final spin speed or

Rinse hold

or deselecting the spin

PC / Optical interface

This is used by service technicians
to run diagnostic checks on your ma-
chine and can also be used to upda-
te programming data in the future.

Start/Stop button

For starting the programme selected
and cancelling a programme once it
has started.

Extra option buttons

Various Extra options can be added
to the washing programmes.

Programme selector

For selecting a programme. The indi-
cator light next to the selected pro-
gramme will come on. The program-
me selector can be turned clockwise
or anti-clockwise.

Door button

Opens the machine door.

I-On/0-Off button

For switching the machine on or off.

Operating the washing machine

Summary of Contents for Polaris





























































Search results

Summary of Contents for Polaris

Reviews:

Related manuals for Polaris

Brands by name

Popular brands

Miele Polaris, Operating Instructions Manual

Search results

Summary of Contents for Polaris

Reviews:

Related manuals for Polaris

Brands by name

Popular brands