System settings
70
Restarting
The
Restart
function shuts down the machine controls and then re-
boots them. This
Restart
can be used, for example, when you get the
prompt
Switch machine off and on
when you are troubleshooting.
Press the
Restart
button.
The
Restart?
confirmation prompt is displayed. Press
OK
to restart or
to cancel the process.
For stable continuous operation, it is recommended to restart the
machine once every 24 hours. The restart can be performed using
this function.
Alternatively, the machine restart can be performed in the web inter-
face automatically using the
System/Machine configuration/Auto-
matic restart
function or manually under
System/Machine func-
tions/Restart the machine
.
Opening the data plate Menu
The following information is listed in the
Data plate
menu:
- Machine type
- Machine name
- Commissioning date
- Fabrication number
- Fabrication index
- Machine type
- Material number
- Software version
In addition to the
Machine name
parameter, an individual name can
be entered for the machine.
Press the button next to the
Machine name
parameter.
The on-screen keyboard is displayed for entering the machine name.
Enter the name for the machine and press
OK
to confirm.
The assigned machine name is used:
- in the web interface
- in reprocessing reports
- in fault reports
- in data transferred to software for process documentation
