Miele PLW 8615 Operating Instructions Manual Download Page 25

Page: 25 / 100

Main menu

Reprocessing

Favorites

Documentation

System

Main menu

18.06.2018 15:05

Actions in
the Main menu

The main menu of the machine is split into headers and footers and
4 menus. The following actions can be performed using the buttons:

- Lock the display, e.g., for surface cleaning (see “Maintenance, lock-

ing machines”)

- Change the display language

- Log a user in and out

- Close popups with messages depending on the user level and the

type of message, warning, or fault message (see “Fault messages
and instructions”)

- Open the list of active messages (see “Fault messages and instruc-

tions”)

- Select and start a reprocessing program depending on the settings

in the Program control menu in the web interface (see “Operation”)

- Call up and start reprocessing programs stored as Favorites de-

pending on the settings in the System, Manage favorites menu (see
“Operation”)

- Print out Reprocessing reports

- Open the System menu to adjust the machine settings depending

on the User level (see “System settings”)

- Open and close the loading door

- Open and close the unloading door after the end of a program de-

pending on the “Authentification - End of program” setting in the
web interface

Summary of Contents for PLW 8615





































































































Search results

Summary of Contents for PLW 8615

Reviews:

Related manuals for PLW 8615

Brands by name

Popular brands

Miele PLW 8615, Operating Instructions Manual

Search results

Summary of Contents for PLW 8615

Reviews:

Related manuals for PLW 8615

Brands by name

Popular brands