System settings
69
Press the button for the required reprocessing program.
The following message appears on the display:
Program test: Skip program block with . Door can be opened at end of
each program block.
Press
OK
to confirm the message.
The program start screen is displayed.
Press the
button.
The
button is displayed – the start of the reprocessing program is
delayed.
Before the water intake, the relevant program phases displayed can
be skipped by pressing the
button.
After each program phase, the following message will appear on the
display before the wash water is drained:
Program test: Door can be opened to take sample.
.
Press
OK
to confirm the message.
The
and
buttons are enabled.
To take a sample, press the
buttons to open the door.
Once you have taken the sample, press the
button to close the
door.
The following message will appear on the display:
Continue program test? To continue, press OK. To open door, press
.
Press
OK
to confirm the message.
The wash water is drained and the next program phase begins.
If a sample does not need to be taken after a program phase:
Press the
button.
The wash water is drained and the next program phase begins.
You can skip each program phase when it begins by pressing the
button.
