manualshive.com logo in svg

Miele PG 8063, Operating Instructions Manual

Share
Download
Miele PG 8063 Operating Instructions Manual Download Page 88

Further settings

88

Display: Temperature

The wash cabinet temperature can be viewed during a programme. 
Either the current actual temperature or the required temperature
which has been preset for the current wash block is displayed.

Open the 

Further settings

 menu by switching the machine off with

the 

 button and then switch it on again with the 

 button whilst

keeping the 

 button held in.

Open the menu as follows:

    

 

Further settings

        

 

Display view

Display view

Actual temperature

Required temperature

-

Actual temperature

Display the current actual temperature in the wash cabinet.

-

Required temperature

Display the required temperature which has been preset for the cur-
rent wash block. If a temperature has not been set, a dotted line 

---

is shown.

During a programme both settings are displayed together as 

Temper-

ature

. There is no breakdown of actual and required temperature.

Select an option using the 

 and 

 arrow buttons.

Press 

OK

 to save the setting.

Summary of Contents for PG 8063

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands