manualshive.com logo in svg

Miele PG 8063, Operating Instructions Manual

Share
Download
Miele PG 8063 Operating Instructions Manual Download Page 56

Operation

56

Selecting a programme

Programme se-
lection buttons

Select a programme using programme selection buttons 

,

 or 

.

Programme list

Press the 

 button and

use the 

 and 

 arrow buttons to highlight a programme and con-

firm your selection with 

OK

.

Temperature
Duration

Min

24

60 °C

Sf Special

The LED in the button selected lights up and the relevant programme
appears in the display. The LED in the 

Start/Stop

 button also starts to

flash.

Another programme can be selected at any time before a programme
has started. Once it has started, programme selection is locked.

The different programmes and their uses are described in “Pro-
gramme chart” at the end of these operating instructions.

Always select the programme depending on degree and type of soil-
ing.

Starting a programme

Close the door.

Press the 

Start/Stop

 button. 

The LED in the button will light up constantly.

Starting a pro-
gramme using
delay start

The start of a programme can be delayed, for example, to benefit
from economy rates of electricity at night. Starting from the pro-
grammed time, a delay start time between 1 minute and 24 hours can
be selected in one minute increments (see “Settings 

/Time of day”).

The connection between the quick-release couplings on the APFD
200 insert and the medium-pressure hoses for the air regulators
may not be absolutely tight, meaning that pressure will drop over
time.
If the pressure drops too much, the wash water may enter the air
regulators.
Therefore, supply the insert with pressure as close to the pro-
gramme start as possible.

The delay start may only be used for reprocessing breathing masks.

Delay start must be switched on (see “Settings 

/Delay start”).

If soiling is left to dry on the load for longer, the reprocessing result
can be adversely affected. There is also a risk of corrosion for
stainless steel items.

Summary of Contents for PG 8063

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands