en - Commissioning
53
Setting the time of day
The time of day is set in the set time of day
format.
Time of day
12 : 15
OK
Use the
(higher) and
(lower) arrow
buttons to set the time of day and confirm
your selection by pressing
OK
.
Setting the water hardness
Your local water authority can give you in-
formation about the exact water hardness in
your area.
With varying water hardness, always set the
highest level. If the water hardness fluctu-
ates between, for instance, 1.4 and
3.1 mmol/l (8 and 17 °dH), the water hard-
ness must be set to 3.1 mmol/l (17 °dH).
The water hardness setting values can be
found in the chart in “Filling the salt con-
tainer”.
Water
hardness
OK
-
+
°dH
14
Set the water hardness level by tapping
the
-
symbol (lower) and
+
symbol
(higher).
Press
OK
to save the setting.
In the event of a fault, it will help the service
technician if you know the hardness of your
local water supply. Document the water
hardness in “Filling the salt container”.
Selecting water connections
This option is only available for dishwash-
ers with more than one water connection
(depending on the model).
All available water connections are activated
in the control system ex-works. Individual
water connections can be subsequently de-
activated, e.g. if no connection options are
available for them.
Following commissioning, the water con-
nections can be reinstated by the Miele
Customer Service Department.
Select one of the available water connec-
tions, e.g.:
-
Hot water
Hot water connection
Water
connections
Hot water
Confirm selection
OK
The frame indicates the activated water
connection. Tapping the connection re-
moves the frame and permanently deactiv-
ates the water connection.
Select
OK
to confirm your choice.
Commissioning completed
Your machine has been successfully set up
once you see the following message.
Information
OK
Commissioning finished
success-fully
Confirm the message with
OK
.
Short
Intensive
Universal
55 °C
55 °C
65 °C
The dishwasher is now ready for operation.
