Supervisor level
76
Debounce time
In coin mode, the debounce time for
the minimum payment signal that
must be applied can be adjusted.
– Factory setting: Short
For coin boxes where the falling coin
generates the paid pulse.
– Long
For central control units on a 230 V
basis.
Payment system overriding time
Setting the transition signal for the
coin box. Security time margin to pre-
vent the coin box being tampered
with.
The transition time can be adjusted in
15-minute increments between 30–
240 minutes or switched off.
If the programme does not end within
the transition period, the setting in the
coin box is reset. The programme is
cancelled.
Factory default: 180 minutes
Duration Cool air
The running time can be adjusted.
A time of between 10 and 120 minutes
can be set in 5-minute increments.
Factory default: 120 minutes
Duration Warm air
The running time can be adjusted.
A time of between 20 and 120 minutes
can be set in 5-minute increments.
Factory default: 60 minutes
FOC programmes
In coin mode, you can decide whether
the
Timed drying cool air
programme
can be used for free.
– Factory default: Off
– On
