Supervisor level
73
Peak load signal
External hardware is connected via the
Miele XCI box.
The peak-load negotiation function
enables the tumble dryer to be con-
nected to an energy management sys-
tem. When a signal is registered, the
tumble dryer's heater is switched off
for a short period or the appliance is
prevented from being switched on.
The tumble dryer may only be oper-
ated with a peak-load system if this
system is connected to the tumble
dryer via the Miele XCI box.
– Factory default: no function
– Peak load with 230 V
– Peak load with 0 V
Peak load prevention
With this function, the application of a
hygiene programme is not amended
when a peak load signal is in place.
The heater stays switched on.
– Factory default: Off
– On
External exhaust flap
External hardware is connected via the
Miele XCI box.
The time delay between the external
exhaust air flap's activation point and
the switch-on time for the drum/fan
motor is regulated.
A message appears in the display while
the exhaust air flap is open.
– Factory default: Off
This option must always be selected
if there is no exhaust air flap to activ-
ate. This prevents the programme
from being cancelled.
– On
- 0 seconds
- 1 second
- 2 seconds
...
- 300 seconds
