Installation
*INSTALLATION*
58
Installation
Ensure that no closeable door, slid-
ing door, or an oppositely hinged
door is installed that would hinder
the door of the tumble dryer being
opened in any way.
Installing the tumble dryer on boats
On other types of floor structures (in
cases where the tumble dryer is in-
stalled on sea-going vessels, for ex-
ample), the fixing materials must be
provided on site.
When installing the appliance on
sea-going vessels, the tumble dryer
must be secured to prevent slipping
and tipping, by fastening it to the
floor of the vessel (e.g. using clamps
that are welded to the floor of the
vessel).
Secure all four of the tumble dryer’s
feet.
Levelling the tumble dryer
The appliance must stand perfectly
level on all four feet to ensure safe and
proper operation.
The screw feet can be adjusted to com-
pensate for unevenness in the floor.
This tumble dryer is not suitable for
building under.
Never block the ventilation slots on
the tumble dryer. Do not block the
gap between the bottom of the
tumble dryer and the floor with plinth
facings, deep pile carpet etc. This
would hinder a sufficient flow of air
to the tumble dryer.
Damage caused by incorrectly
installed or missing ducting.
Moist air from the tumble dryer can
cause damage in the room where the
appliance is installed.
Please observe the instructions in
“Installation of the ducting”.
External control equipment
The XCI box accessory is needed to
connect external control equipment,
such as payment systems or peak load
control units.
