Miele NOVOTRONIC T 7644 C, Operating Instructions Manual, Page: 25 / 56

Cleaning with water
The lint screens and door lint filter
should be given a wet cleaning
only
when severely blocked or plugged.
^
Open the door and extract the door
lint filter from the door casing.
Remove both lint screens from the
port-hole:
^
Turn the left and right lint screen
knobs
a
(until you hear them click).
^
Grasping the knobs, pull the lint
screens out towards the centre
b
.
^
Clean all screens under running hot
water.
^
Shake the screens thoroughly until
drips are no longer visible.
^
Dry them thoroughly and with care.
^
Also clean the air passages
underneath the screens, using a
vacuum cleaner, for example.
,
When inserted, all lint screens
must be dry. Wet screens can cause
faulty dryer operation!
^
Insert the door lint filter fully into the
door casing.
^
Insert the lint screens in the port-hole
and push them downwards.
^
Latch both knobs (until you hear
them click).
Cleaning the dryer
Disconnect the dryer from the
electrical supply.
^
Clean the housing, control panel and
door seal only with a slightly damp
cloth and mild detergent or soapy
water.
^
Clean stainless steel parts (like the
drum) with a suitable stainless steel
cleaner.
Use no scouring products, cleaners
containing solvents, or glass or
all-purpose cleaners. They can
damage plastic surfaces and other
parts.
^
Dry all parts with a soft cloth.
Cleaning and care
25