Switching over from a running
program
As a protection against unintentional
changes, program selection is no
longer possible.
To be able to choose a new program,
you must cancel the current program.
- Canceling and selecting a new
program
^
Press the
Start/Stop
button.
The load will be cooled down for a
few minutes, until a specific drying
time and temperature have been
reached.
If you press the
Start/Stop
button
again, the drum stops,
End
appears
in the display.
^
Switch the dryer off.
^
Then, switch it on again.
^
Select and start a new program im-
mediately.
- Interrupting a program and
removing laundry
^
See below: "Loading or removing
laundry".
^
Turn the dryer off after closing the
door.
Loading or removing laundry
^
Press the
Door
button.
^
Open the door.
,
Danger of burning:
Do not touch the back of the drum
when adding or removing items.
Temperatures in the drum area can
be high.
^
Add or remove laundry as needed.
^
Close the door.
^
Press the
Start/Stop
button.
Time remaining
When the program sequence is
changed, the time remaining as shown
by the display may differ from the
actual drying time.
Changing the program sequence
21
Summary of Contents for NOVOTRONIC T 7644 C
Page 53: ...53 ...
Page 54: ...54 ...
Page 55: ...55 ...
Page 56: ...M Nr 07 323 260 01 Alteration rights reserved 2009 ...
