Technical Information
13
T1500 Series Clothes Dryers
3.5
Condenser Drawer (Condenser Models Only)
General
Information
Depending on the installation, condensed water is either pumped to
an on-site drain, or collected in the Condensed Water Drawer.
The Condensed Water Drawer holds approximately one (1) gallon
of water. The water should be emptied from the drawer after each
program completes. Should the container be full (or become filled
during operation) the following occurs:
The “Empty out container” indicator illuminates
The buzzer sounds
The drying program stops and enters the cooling down cycle
To empty the Condensed Water Drawer:
1. Hold the cap open while emptying the Water Drawer.
2.
Drain all water
3.
Install the Water Drawer back into the appliance. Ensure the
locks into place.
Warning
The condensed water is not suitable for consumption.
