manualshive.com logo in svg

Miele Novotronic T 1520, Technical Information

The Miele Novotronic T 1520 is a reliable and efficient washing machine, equipped with advanced features to simplify your laundry routines. To ensure smooth operation, it is important to refer to the comprehensive Operating Manual. Download this manual for free from our website, offering a hassle-free experience for all Miele appliance users.

Share
Download
background image

 
 

Technical Information 

 

 

11

 

T1500 Series Clothes Dryers 

 
3.0   

Commission and Operation 

 

3.1 

General Operation – T1515, T1520, T1526, 
T1565C and T1570C 

1.  Turn on the Dryer. 
2.  Press the Door Button to open the Door.  
3.  Place laundry into the appliance 
4.  Select a program 
5.  Select option(s) – as desired. 
6.  Press the Start Button.

 

 

 

 

 

3.2 

Additional Function PushButtons – T1515, 
T1520, T1526, T1565C and T1570C 

 
Door 

Opens the Door or can be used to cancel a program (does not stay 
pushed in). 

 
ON / OFF 

 

Turns the appliance On/Off, and can be used to cancel a program.  

 
Buzzer 

Enables the buzzer,  when the anti-crease stage of the program is 
reached. 
 

Load size - Full / Half 

To dry a standard size load or more at peak efficiency, select press 
this option before starting a program. 

 
Low Temperature. 

Utilizes lower drying temperatures for delicate fabrics.  

 
Start 

Starts the selected program (does not stay pushed in). 

 
 
 
 
 
 
 
 

Summary of Contents for Novotronic T 1520

























































Reviews:

No comments

Related manuals for Novotronic T 1520

Quincy Compressor QPNC 10 Instruction And Maintenance Manual preview
QPNC 10
Brand: Quincy Compressor Pages: 12
MAGUIRE LPD-30 Installation Operation & Maintenance preview
LPD-30
Brand: MAGUIRE Pages: 127
Unit UHD-349 Instruction Manual preview
UHD-349
Brand: Unit Pages: 9
Henny Penny CFE-415 Operator'S Manual preview
CFE-415
Brand: Henny Penny Pages: 82
Jata Beauty SC56B Instructions Of Use preview
SC56B
Brand: Jata Beauty Pages: 20
Logik LCD7W18 Instruction & Installation Manual preview
LCD7W18
Brand: Logik Pages: 28
BaByliss Digital Sensor 6500FRE Manual preview
Digital Sensor 6500FRE
Brand: BaByliss Pages: 37
Insignia NS-AF10DBK2 User Manual preview
NS-AF10DBK2
Brand: Insignia Pages: 19
Carson CSF262W Use And Care Manual preview
CSF262W
Brand: Carson Pages: 9
KitchenAid electric dryer Installation Instructions preview
electric dryer
Brand: KitchenAid Pages: 5
KitchenAid 53-3498 Installation Instructions Manual preview
53-3498
Brand: KitchenAid Pages: 6
KitchenAid KEYE800T Use & Care Manual preview
KEYE800T
Brand: KitchenAid Pages: 16
KitchenAid 3397629 Installation Instructions Manual preview
3397629
Brand: KitchenAid Pages: 7
KitchenAid KEYE760W Use And Care Manual preview
KEYE760W
Brand: KitchenAid Pages: 23
KitchenAid 3405633 Use & Care Manual preview
3405633
Brand: KitchenAid Pages: 20
KitchenAid 3405634 User Manual preview
3405634
Brand: KitchenAid Pages: 44
KitchenAid 8578194 User Instructions preview
8578194
Brand: KitchenAid Pages: 16
KitchenAid KEYE677B Use And Care Manual preview
KEYE677B
Brand: KitchenAid Pages: 24

Brands by name

Popular brands

Load more brands