Settings
43
Software version
The software version is intended for the
Miele Customer Service Department.
You do not need this information for
domestic use.
Showroom programme
This function enables the microwave
oven to be demonstrated in showrooms
without heating up. Do not activate this
setting for domestic use.
Demo mode
If you switch the microwave oven on
while demo mode is activated, the
message
Demo mode
appears in the
display. The appliance does not heat
up.
–
On
Touch
OK
for at least 4 seconds to
activate demo mode.
–
Off
Touch
OK
for at least 4 seconds to
deactivate demo mode.
The microwave oven is fully
functional again.
Factory default
One setting can be used to reset all the
changes made to the initial state of the
microwave oven.
–
Do not reset
All changes made still apply.
–
Reset
All settings are reverted to the factory
default settings.
Summary of Contents for M 7140 TC
