manualshive.com logo in svg

Miele KWT 2661 ViS, Operating And Installation Instructions

Share
Download
Miele KWT 2661 ViS Operating And Installation Instructions Download Page 94

Frequently Asked Questions

94

Problem

Possible cause and solution

No alarm sounds de-
spite the appliance door
being open.

You have switched off the audible signal.

Switch the audible signal back on using Settings
mode 

.

The 

Sabbath Mode

 

 function is switched on: the tem-

perature display is dark and the 

 symbol is shown

on the display.

You can switch off Sabbath mode at any time (see
“Selecting additional settings – Switching 

Sabbath

Mode

 

 on or off”).

The door of the wine
conditioning unit cannot
be opened.

The 

Pull2Open

 Door Assistant is switched on but the

wine conditioning unit has a handle-free cabinet
front.

For handle-free cabinet fronts, switch on the

Push2Open

 Door Assistant (see “Selecting addi-

tional settings – Switching on the 

Door Assis-

tant

 

”).

The appliance door
cannot be opened when

Sabbath Mode

 

 is

switched on.

The 

Push2Open

 Door Assistant is switched on at the

same time as 

Sabbath Mode

.

When 

Sabbath Mode

 is switched on, the Door As-

sistant is deactivated.

Pull the door open from below or from the side.

Summary of Contents for KWT 2661 ViS









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands