manualshive.com logo in svg

Miele KWT 2661 ViS, Operating And Installation Instructions

Share
Download
Miele KWT 2661 ViS Operating And Installation Instructions Download Page 30

Installation

*INSTALLATION*

30

Securing with a wooden wedge

Secure the installation niche to the
wall behind it and/or above it as re-
quired using the anti-tip brackets 

.

Pushing the wine conditioning unit
into the niche

Then push the wine conditioning unit
into the niche, taking care not to
damage the electrical cord.

If you are installing several appliances
side by side, secure the wine condi-
tioning units/refrigeration appliances
to one another now (see the installa-
tion instructions for the side-by-side
installation kit).

To ensure that the wine conditioning
unit can then be aligned correctly, the
toe-kick ventilation grille must be re-
moved from the appliance toe-kick:

Carefully guide a flat-head screw-
driver through the toe-kick ventilation
grille 

 on both sides and use it to

push the internal plastic latches out-
wards to release the toe-kick ventila-
tion grille.

Place the toe-kick ventilation grille to
one side.

Summary of Contents for KWT 2661 ViS









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands