manualshive.com logo in svg

Miele KWT 2661 ViS, Operating And Installation Instructions

Share
Download
Miele KWT 2661 ViS Operating And Installation Instructions Download Page 25

Installation

*INSTALLATION*

25

Tools required

– Cordless drill

– TX 20 screwdriver

– Hammer drill

– Drill bits in various sizes, depending

on materials

– Hammer

– Open-ended wrench

– Ratchet wrench, attachment: socket,

5/16" (8 mm)

– Adhesive tape

– Utility knife

– Pipe wrench

– Level

– Tape measure

– Pencil

Other

– Step ladder

– Hand truck

Weight of cabinet front

Before installing the cabinet front, en-
sure that the weight of the door does
not exceed the maximum permitted:

Wine conditioning
unit

Max. weight of
cabinet front

KWT 26x1 Vi(S)

160 lb (73 kg)

If the cabinet front is too heavy,

this can cause damage.
Installing a cabinet front which is
heavier than the maximum permitted
weight could damage the hinges. 
This damage can affect various fac-
tors, such as operation of the appli-
ance.
Before installing the cabinet front,
ensure that the weight of the door
does not exceed the maximum per-
mitted.

Summary of Contents for KWT 2661 ViS









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands