manualshive.com logo in svg

Miele KWT 2661 ViS, Operating And Installation Instructions

Share
Download
Miele KWT 2661 ViS Operating And Installation Instructions Download Page 72

Selecting additional settings

72

Switching off Demo Mode 

Demo mode allows the wine condi-
tioning unit to be presented in the
showroom 

without the cooling sys-

tem being switched on

. Do not acti-

vate this setting for domestic use.

If Demo mode has been switched on
as a default setting, 

 will show in the

display.

In settings mode 

, use the 

 and 

arrow buttons to select 

Demo Mode

and select 

OK

 to confirm your selec-

tion.

Press OK for 4 seconds to deactivate

 ap-

pears in the display.

Follow the instructions on the display
and touch and hold the sensor con-
trol 

OK

 for 4 seconds.

The countdown 

Demo Mode will deacti-

vate in seconds.

 will appear in the dis-

play.

Demo Mode deactivated. The appliance will
cool down.

 appears in the display.

Confirm the message with 

OK

.

The main screen appears in the display
again.

Summary of Contents for KWT 2661 ViS









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands