Problem solving guide
69
Message
Cause and remedy
is lit up yellow in the
one of the temperature
displays and an alarm is
also sounding.
The
door alarm
has been activated (also see “Tem-
perature and door alarm”).
Touch
in the display.
The alarm message is confirmed and the warning
tone stops.
The current temperature reappears in the temperature
display.
Close the relevant appliance door.
The alarm will stop.
is lit up red in the
one of the temperature
displays and an alarm is
also sounding.
The
temperature alarm
has been activated (see
“Temperature and door alarm”). The temperature in
the respective section has risen higher or fallen lower
than the temperature set.
This could be due to, for example:
– too much warm ambient air entering the cabinet
when bottles are being rearranged or taken out,
– when a large number of bottles are stored for the
first time,
– an appliance door being opened too often, or be-
ing left open.
– a large quantity of fresh food being placed in the
freezer at once without switching on the Super
freeze function.
– an interruption to the power supply.
– a fault with the appliance.
Touch
in the display.
The alarm message is confirmed:
goes out and
the alarm stops.
The start screen appears in the display: the warmest
temperature recorded in the freezer will flash for about
1 minute in the display. Then the temperature display
will change to the current temperature in the freezer.
You can exit from the flashing temperature display
early:
Touch the temperature display.
Summary of Contents for KWNS 28462 E ed/cs
Page 116: ......
Page 117: ......
Page 118: ......
Page 120: ...M Nr 10 999 990 01 en GB KWNS 28462 E ed cs ...
