manualshive.com logo in svg

Miele KM 6320, Operating And Installation Instructions

Share
Download
Miele KM 6320 Operating And Installation Instructions Download Page 41

Programming

41

You can adapt the programming of the

cooktop to your personal needs. Sever‐

al settings can be changed in succes‐

sion.
After the programming function is start‐

ed, 

 (program) and 

 (status) will ap‐

pear in the timer display. With cooktops

that have 3 cooking zones, an addition‐

al display appears at the back left.
The program is displayed in the front

left and back left cooking zone dis‐

plays.
Example:

Program 03 =

Front left 

, rear left 

Program 14 =

Front left 

, rear left 

The status is shown in the front right

cooking zone display.

After the programming function is exit‐

ed, an automatic reset is performed. It

is concluded when an indicator light

lights up briefly via the 

 sensor but‐

ton.

Do not turn on the cooking zone until

the reset is concluded.

Starting the programming

function

When 

the cooking zone is turned

off

, tap the 

 and 

 sensor buttons

simultaneously until the indicator light

for the safety lock flashes.

Setting a program

To set the 

ones

, touch the sensor for

the 

back left 

cooking zone followed

by the respective number on the set‐

tings bar.

To set the 

tens

, touch the sensor for

the 

front left 

cooking zone followed

by the respective number on the set‐

tings bar.

Setting the status

Touch the sensor for the 

front right

cooking zone followed by the respec‐

tive number on the settings bar.

Saving the settings

Touch the 

 sensor until the indica‐

tors go out.

How to avoid saving the set‐

tings

Touch the 

 sensor until the indica‐

tors go out.

Summary of Contents for KM 6320

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands