Miele KM 6320 Operating And Installation Instructions Download

Page: 19 / 64

Before using for the first time



Please adhere the extra data plate for

the appliance supplied with this doc‐

umentation in the space provided in

the "Technical service, data plate,

warranty" section of this manual.



Remove any protective foil and stick‐

ers.

Cleaning the cooktop for the

first time



Before first use, wipe down the appli‐

ance with a damp cloth and dry it.

Turning on the cooktop for the

first time

Metal components are protected by a

conditioning agent. Smells and vapor

may occur when the appliance is used

for the first time. The heating of the in‐

duction coils also causes odors in the

first few hours of operation. With each

subsequent use, the odor is reduced

until it disappears entirely.
The smell and any vapors do not indi‐

cate a faulty connection or a defective

appliance and are not harmful to your

health.

Please note that the heat-up time for

induction cooktops is very much

shorter than for conventional cook‐

tops.

Summary of Contents for KM 6320

































































Search results

Summary of Contents for KM 6320

Reviews:

Related manuals for KM 6320

Brands by name

Popular brands

Miele KM 6320, Operating And Installation Instructions

Search results

Summary of Contents for KM 6320

Reviews:

Related manuals for KM 6320

Brands by name

Popular brands