Miele KM 6304 Operating And Installation Instructions Download Page 60 | Manualshive

Page: 60 / 80

Miele KM 6304 Operating And Installation Instructions Download Page 60

The appliance must only be installed
and connected to the electricity
supply by a suitably qualified and
competent person in strict
accordance with current national
and local safety regulations.
Fit the wall units and rangehood
before fitting the cooktop to avoid
damaging the appliance.

~

The veneer or laminate coatings of

worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.

This appliance must not be installed
over a fridge, fridge-freezer, freezer,
dishwasher, washing machine,
washer-dryer or tumble dryer.

~

This cooktop must not be installed

above an oven unless it has a built-in
cooling down fan.

~

After installation, ensure that the

connection cable is without hindrance
and that there is no mechanical
obstruction which could damage it.

All dimensions in this instruction booklet
are given in mm.

Safety instructions for installation

60

«
...
58
59
60
61
62
...
»

Summary of Contents for KM 6304

















































































Reviews:

No comments