Miele KM 6304 Operating And Installation Instructions Download Page 58

Page: 58 / 80

Signing on the cooktop

If you want to sign the cooktop

– on to the

Miele

{

home

system, first prepare the signing on

procedure on the master appliance (see the "Miele

home"

fitting and installation instructions)

– on to the

Con

ctivity

system, first sign on the rangehood

(see the "Con

ctivity" fitting and installation instructions).

With the cooktop switched off, touch the

and

sensors

at the same time

until the safety lock indicator light

flashes.

After selecting the programming mode,

(Programme) and

(Status) will appear in the timer display. On cooktops with 3
cooking zones, an additional indicator will appear at the rear
left.

Touch the sensor for selecting the

front left

cooking zone

and then touch the 1 on the numerical keypad (Set
Programme 10).

Touch the sensor for selecting the

front right

cooking zone

and then touch the 2 on the numerical keypad (Set Status 2
= Signed on).

The signing-on process starts, and the number 2 flashes. The
signing-on process will take a few minutes. The number 2 will
light up constantly when the process has been completed
successfully.

To save the setting, touch the

sensor until all the

displays go out.

Proceed as described in the "Miele

home" or Con

ctivity

fitting and installation instructions.

Con

ctivity and Miele

home

Summary of Contents for KM 6304

















































































Search results

Summary of Contents for KM 6304

Reviews:

Miele KM 6304, Operating And Installation Instructions, Page: 58 / 80

Search results

Summary of Contents for KM 6304

Reviews: