Miele KM 6304 Operating And Installation Instructions Download Page 27

Page: 27 / 80

Fire hazard.
Do not leave the appliance unattended whilst it is being
used.

To switch the cooktop on

Touch the

sensor.

will appear in each of the cooking zone displays. If no

further entry is made, the cooktop will switch itself off after a
few seconds for safety reasons.

Activating the cooking zones

Touch the sensor for selecting the cooking zone you want.

will flash in the cooking zone display.

Setting the power level

Standard power level range

Touch the appropriate number on the numerical keypad.

The power level selected flashes in the display for a few
seconds to start with and then lights up constantly.

Extended power level range

(see "Power level range")

Touch the area between the numbers.

The power level selected flashes in the display for a few
seconds to start with and then lights up constantly. The
intermediate setting will be represented by an illuminated dot
next to the number.

Operation

Summary of Contents for KM 6304

















































































Search results

Summary of Contents for KM 6304

Reviews:

Miele KM 6304, Operating And Installation Instructions, Page: 27 / 80

Search results

Summary of Contents for KM 6304

Reviews: