Miele KM 6304, Operating And Installation Instructions, Page: 53 / 80

Problem Possible cause Remedy
The sensors are
over-sensitive or do
not react at all. The sensitivity level of
the sensors has
changed. Make sure that there is no direct
light (from the sun or from an
artificial source) falling onto the
cooktop and that the
surrounding area is not too dark.
Make sure that there is nothing
covering the sensors or the
cooktop. Take any pans off the
cooktop and wipe away any
food deposits.
Interrupt the power supply to the
cooktop for approx. 1 minute.
If this does not solve the
problem, please call Miele.
FE flashes alternately
with numbers in the
timer display.
FE 44
The overheating
protection
mechanism has
triggered. See "Overheating protection".
FE 47
The fan is either
blocked or faulty. Make sure it has not been
blocked by something like a
fork. Remove the cause of the
blockage. If the fault message
appears again, call Miele.
FE 48
Other fault messages
FE..
There is an electronic
fault. Interrupt the power supply to the
cooktop for approx. 1 minute.
If the problem persists after
reconnecting the appliance to
the power supply, please
contact Miele.
Problem solving guide
53